Handwired Tube Amps
Vintage Amp Restauration
Speakers & Cabinets

Audio Amp Co | Signature Plexis

AUDIO AMP CO RBMM »classic« MKII

For those players who don't need the features of the RBMM »cascade « model.

Lower gain structure, based on a 1970 built MARSHALL® Major, tonally settled in the Deep Purple MKII area from 1969 till 1973. Useful features added from the RBMM »cascade« model. In general, I recommend the use of BSM® (treble) booster pedals, they're made in Germany by a good friend of mine.

This is the reduced and simpler version of the RBMM »cascade «model, without the two master volume circuits and less features. It offers a more »classic« DP MKII area tone, before Ritchie Blackmore's Majors underwent all the modifications. Still designed to be used with all kinds of (treble) boosters or preamp pedals. The power amp is running in Ultra Linear mode and offers about half of the power of an original Major.

Für alle Anwender, die nicht die Ausstattungsdetails des RBMM »cascade « Modelles benötigen.

Eine niedrigere Gain Struktur, basierend auf einem MARSHALL® Major von 1970, tonal angesiedelt in der Deep Purple MKII Area von 1969 bis 1973. Alle sinnvollen und nützlichen Ausstattungsdetails wurden vom RBMM Cascade übernommen. Generell empfehle ich die Verwendung eines BSM® (Treble) Boosters, diese Pedale werden in Handarbeit von einem guten Freund meinerseits in Deutschland gefertigt.

Dies ist die abgespeckte und einfachere Version des RBMM »cascade « Modelles, ohne die beiden Master Volume Schaltungen und mit weniger Ausstattung. Der Verstärker bietet einen klassischeren Deep Purple MKII Area Sound, bevor Ritchie Blackmores Majors modifiziert wurden. Auch dieser Verstärker entfaltet sein Optimum an Ton unter Verwendung eines guten (Treble) Booster oder Preamp Pedals. Die Endstufe läuft im sog. Ultra Linear Modus und bietet ca. die Hälfte der Leistung eines Majors.

Specs

  • Circuit: AUDIO AMP CO design and layout, based on MARSHALL® Major
  • Rectifier: Diode bridge
  • Power Amp: 2×KT88, Class A/B p/p, Ultra Linear circuit
  • Bias Circuit: adj. negative grid bias
  • Driver/PI stage: ECC802S
  • 1st Gain stage: ECC803S
  • 2nd Gain stage: ECC803S
  • Controls: Presence, Bass, Middle, Treble, Volume I, Volume II, RTC I, RTC II, EQ slope R, EQ treble cap, Filter switch, Push/pull bright switches
  • Inputs: Bright Ch. Hi and Lo (-6dB), Normal Ch. Hi and Lo (-6dB)
  • Output: two speaker outputs, Line Out
  • Output Z: 4, 8 or 16Ω switchable
  • Power: 90W UL
  • Features: aluminium chassis, hand wired, point to point on turret board, Bias test jacks, 4mm banana type, MERCURY MAGNETICS® USA transformers

Options